JMSL-S series plumbing coal fired warmer
JMSL-S plumbing hot air coal fired warmer
10-20-30 thousand kcal◆ New design, using JNS acid-resistant board material, durable and long life.
◆ Wide application of coal Anthracite, anthracite, lump coal, and loose coal can be used. Users can choose coal nearby to save investment.
◆ Large capacity Cylindrical combustion chamber, top-mounted coal inlet, can be continuously burned for 6-12 hours after adding coal once.
◆ Compulsory combustion coal-fired combustion-supporting system composed of flue induced draft fan, flue gas is discharged smoothly without blockage.
◆ Fast heating of water heating Adopting the unique design of the spiral tube heating technology invented by our factory combined with separate fire and anti-burning, the heating area is greatly increased, so the equipment heats up fast and the thermal efficiency is higher.
◆ Fan duct heater consisting of spiral heating fins and fins for air heating and dust removal, with dual functions of coal saving and dust removal. The waste heat generated by the boiler is re-radiated through the duct heater and removed from the house after dust removal. better. The machine can be installed anywhere in the house.
◆ Silent design The heat exchanger of the air heating part adopts low-pressure fan, without noise pollution.
◆ Easy maintenance Open the four bolts of the upper cover and the lower exhaust pipe, you can clean the pipe directly, saving time and effort, and easy maintenance.
◆ Automatic control improvement The manual delay control of the water heating fan and pump is changed to the automatic water temperature control. The water heating fan is equipped with the phenomenon of exhausting cool air, and the operation is simpler.
◆ High degree of automation, heat utilization rate reaches 95%, no smoke pollution, full energy utilization.
◆ One machine is multi-purpose, injecting cold wind to start the fan in summer, you can get the same effect as ground temperature air conditioner.
主机技术数据： Main technical data of JMSL-S plumbing hot air coal fired heater :
Overall dimensions mm
Coal consumption Kg
Thermal efficiency %
Warm air temperature ℃
Heating area ㎡
S L-10 S JM S L-10 S
* 620 * 1200 1000 * 620 * 1200
200 ≈ 200
S L-20 S JM S L-20 S
* 1160 *1 550 1000 * 1160 * 1 550
260 ≈ 260
S L-30 S JM S L-30 S
* 1280 *1 700 1100 * 1280 * 1 700
350 ≈ 350